Product/Service
Holding Tubes
Source: CSI
Holding tubes provide a fixed volume of tubing to "hold" a product for a set period of time at a given flow rate.
Holding tubes provide a fixed volume of tubing to "hold" a product for a set period of time at a given flow rate.
CSI engineers will assist you in sizing the right holding tube for your application. CSI's holding tubes are designed to meet the Pasteurized Milk Ordinance (PMO) as well as FDA and USDA standards. CSI can also pre-fit holding tubes with a flow diversion valve(FDV). An FDV can divert unpasteurized product back to a balance tank, Send pasteurized product to forward flow and provide leak detection.
Holding Tube Common Applications
- Milk
- Barbeque Sauce
- Eggs
- Infant Formula
Holding Tubes Features
- Proper slope of no less than 1/4" per foot to allow drainage and meet USDA, 3A and other regulatory requirements
- No short circuiting capability
- Supports to maintain the tubes in a fixed position
- Salt injection provisions for timing and confirmation
- Optional flow diversion valve and controls
- Outstanding welds, materials and workmanship
- Heavy-duty frame design
Need More Information? Just Ask.
Click the button below to directly contact the supplier. Use it to:
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
