New Process Density Sensors From Anton Paar: Easy To Integrate, Cost-Efficient To Run

The new L-Dens 4X7 density sensors are highly accurate, long-life and maintenance-free. They have low integration costs and low operating costs and provide density results at 4-digit accuracy.

Ashland, VA (PRWEB) Building on thirty years of experience in process density and concentration measurement, Anton Paar launches the new L-Dens 4X7 series of sensors for use in the petroleum, chemical and beverage industries. The wide range of L-Dens 4X7 sensors includes different materials, process connections and electrical interfaces to suit each plant. Continuous density measurement with L-Dens 4X7 sensors increases a plant’s productivity. Consumption of raw materials and energy is optimized and the production runs at maximum capacity.

To keep the costs for integration as low as possible, the L-Dens 4X7 sensors are small, lightweight and compact. They are mounted with minimum integration work directly inline or in a bypass and require no extra support. The sensors come with standard data interfaces and therefore allow quick connection to the most common evaluation units, PLCs and flow computers.

After installation the robust sensor operates for years without maintenance. L-Dens 4X7 sensors have no moving parts and no operating costs. Today, density sensors from Anton Paar which were installed in the mid-1980s for concentration measurement are still delivering reliable values with the same high level of accuracy as on their first day in operation.

For more information on compact, continuous & cost-efficient density measurement, visit http://www.anton-paar.com.