Online Density Sensors For High Flow Rates
These density sensors for high flow rates and/or inhomogeneous samples have an inner diameter of 22 mm. They continuously monitor the product quality of liquids online during production. The temperature-compensated density or concentrations are calculated from the measured values. Depending on the sensor, these values are either calculated, displayed and processed by an Anton Paar evaluation unit or calculated inside the sensor and provided as a 4-20 mA signal.
These density sensors for high flow rates and/or inhomogeneous samples have an inner diameter of 22 mm. They continuously monitor the product quality of liquids online during production. The temperature-compensated density or concentrations are calculated from the measured values. Depending on the sensor, these values are either calculated, displayed and processed by an Anton Paar evaluation unit or calculated inside the sensor and provided as a 4-20 mA signal.
Robust design for safe use
- Typical applications: High flow rate or inhomogeneous samples
- Wetted parts: Stainless Steel 1.4571
- Inner diameter of the U-tube: 22 mm
- Special version with various flanges and clamps available