Product/Service

PBA-SI Generation M: Packaged Beverage Analyzer For Soft Drinks With Inversion

Source: Anton Paar USA

PBA-SIGenerationM.jpg
The PBA-SI Generation M (Packaged Beverage Analyzer for Soft Drinks with Inversion) is the up-to-date measuring system for beverage analysis.
Request Information

The PBA-SI Generation M (Packaged Beverage Analyzer for Soft Drinks with Inversion) is the up-to-date measuring system for beverage analysis. Determine sugar (°Brix), CO2 and degree of inversion in soft drinks without prior sample degassing. The beverage is filled into the analysis system directly from its container and is then measured within five minutes: °Brix, CO2 and degree of inversion are determined in a single work step. By simultaneously measuring both density and sound velocity the current °Brix, the °Brix before the start of the inversion, the °Brix after full inversion and the current degree of inversion are determined fully automatically. The modular system consists of the Soft Drink Analyzer M/P density and sound velocity meter, the CarboQC ME CO2 measuring module, and the PFD filling device.

Precise beverage analysis without sample preparation

  • No sample preparation required (no degassing, no filtering)
  • Measurement directly out of glass bottles, PET bottles and cans
  • Precise determination of °Brix, CO2 and degree of inversion
  • Additional output: Package pressure and dissolved air

Reproducable measurements of inverting samples

  • For soft drinks containing cane sugar or beet sugar
  • Combined density and sound velocity measurement
  • Determination of current °Brix, °Brix fresh, °Brix inverted and degree of inversion

Fast, comfortable and safe

  • Measuring time: 5 minutes
  • Modular design (Plug and Play)
  • Intuitive touchscreen operation
  • U-view™: Live image of density measuring cell from a built-in camera
  • Safe and clean sample handling with the PFD filling device

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information