Alfa Laval Plate Heat Exchangers - CSI
Alfa Laval's gasketed plate heat exchangers are a compact and efficient heat transfer solution.
Click Here To Download:
•Brochure: Alfa Laval Heat Exchangers For Hygienic Use
•Datasheet: FrontLine Plate Heat Exchangers
•Datasheet: BaseLine Plate Heat Exchangers
•Datasheet: M Series Plate Heat Exchangers
•Datasheet: TS-M Steam Heater Series
The Alfa Laval gasketed plate heat exchanger models are a compact and efficient heat transfer solution and suitable for a wide range of applications. Alfa Laval's plate heat exchangers Alfa Laval's gasketed plate heat exchangers are designed for exceptional control, which makes them ideal for heating and cooling duties in demanding hygienic processes.
Frontline Plate Heat Exchangers
The Frontline series offers the most advanced plate heat exchanger technology available for food, dairy, beverage and pharmaceutical applications. The combination of high pressing depth and a pattern with relatively few contact points provides longer operation time without interruptions. The distribution pattern assures an even flow over the entire plate. The ports have a diameter enabling cleaning in place (CIP) with the same flow used in the process itself.
BaseLine Plate Heat Exchangers
The BaseLine PHE series is used from cooling and heating of dairy, brewery, beverage and viscous products and pasteurization in some applications. The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of two fluids between which heat transfer will take place. The plates are fitted with a gasket which seals the channel and directs the fluids into alternate channels. The number of plates are determined by the flow rate, physical properties of the fluids, pressure drop and temperature program.
TS-M Plate Heat Exchangers
The TS-M Series solves two main problems that occur when conventional plate heat exchangers (PHEs) are used as steam heaters. The first is that when water is heated over a relatively wide temperature difference, e.g. from 10 to 70°C (50 to 158°F), the high steam velocity causes erosion and noise problems. The second is that when high water flow rates are used when heating water only a few degrees, the PHE has to be oversized to keep the secondary side (water) pressure drop within reasonable limits. Both of these drawbacks are now eliminated in the new TS-M Series of PHEs by a unique plate geometry that allows problem-free heating over narrow and wide temperature ranges.
M-Series Plate Heat Exchangers
The M-Series is for utility heating and cooling duties the industrial plate heat exchangers of Alfa Laval can be used . The standard design of the M-Series plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interplate channel and directs the fluids into alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is created for highest possible efficiency.
Click Here To Download:
•Brochure: Alfa Laval Heat Exchangers For Hygienic Use
•Datasheet: FrontLine Plate Heat Exchangers
•Datasheet: BaseLine Plate Heat Exchangers
•Datasheet: M Series Plate Heat Exchangers
•Datasheet: TS-M Steam Heater Series