Zeta Plus H Series Depth Filters

Zeta Plus H Series is a charge-modified depth filter constructed with high-tensile strength media to perform efficiently even under operating conditions requiring elevated operating temperatures or repeated hot water sanitation cycles. H series filters are available in either standard sheet or easy to use, labor saving cartridges.

Zeta Plus Cartridges and Housings to Fit Every Need
Zeta Plus H Series filters are available in 8, 12 and 16 inch diameter cartridges, providing filtration surface areas from 2.8 ft² to 39.7 ft² (0.26 m² to 3.7 m²) per cartridge. This broad range of cartridge configurations allows for easy scale-up from the bench top to pilot scale to full production. A wide variety of industrial and sanitary Zeta Plus housings are available to provide totally enclosed liquid filtration. Refer to CUNO literature number LITHSZPBC and LITZPH.1P2.

Zeta Plus Cartridge System Vs. Plate & Frame Filter Economics
The Zeta Plus cartridge system has a number of advantages over conventional plate and frame filters. Since the cartridge system utilizes a totally enclosed housing, there is no product leakage and no exposure of the filter media to external contamination allowing for effective use of the media, higher throughputs, and low operating costs. The plate and frame filter press design is open to the environment making both filter media and product susceptible to external contamination. The "open" design requires more frequent media change-out cycles, typically every few days. This results in lower throughputs and higher operating costs.

Features & Benefits
More than three times the strength of competitive media to withstand multiple steaming and hot water sanitization cycles.

• Extended filter life resulting in high throughputs, fewer cartridge change-outs, and reduced operating costs.

Combined depth filtration and electrokinetic adsorption.

• Efficient haze and particle removal at micron ratings smaller than the mechanical rating alone.

Easy-to-install cartridges for rapid change-out.

• Reduced labor cost.

Totally enclosed, sanitary systems and housings.

• Zero edge leakage and external contamination.

Variety of cartridge sizes and filtration surface areas.

• Flexible options for all flow requirements.

All components FDA CFR Title 21 listed.

• Safe for all food & beverage filter applications.

Applications
The Zeta Plus H Series is ideally suited for clarification and pre-filtration in food and beverage, cosmetic, and general applications where the exceptional high wet-tensile strength media provides extended service life. These include aqueous, alcoholic, proteinaceous, and acidic solutions.